Skip to main content

Search Proceedings

Proceedings

J. Galvan-Mancilla, J. C. Torres-Guzman, D. Ramirez-Ahedo

Torque proficiency test among accredited laboratories in Mexico

A. Navarro-Nateras, J. C. Torres-Guzman, P. Olvera-Arana

Measurement systems development for the calibration of leaks and holes in dynamic pressure (microflow) at CENAM, Mexico

Hiroaki KAJIKAWA, Tokihiko KOBATA, Kazunori IDE, Akira OOIWA

Precise determination of the jacket pressure coefficient of controlled-clearance pressure balances

W. Sabuga, T. Priruenrom

An approach to the evaluation of dimensional measurements on pressure-measuring piston-cylinder assemblies

M. Caravaggio, G. Molinar Min Beciet, P. De Maria, G. Buonanno, G. Giovinco

FEM analysis for an industrial pressure balance from 3 MPa to 120 MPa in liquid medium

G. Buonanno , J. Man, G. Molinar Min Beciet

Characterization of the IMGC-DH100L pressure balance using finite element analysis

Juan Benjamin Soriano Cardona, Manuel Segura Galindo

Considerations in mass calibration of pressure balance weights

C. Marinari, F. Mazzoleni, J. C. Torres-Guzman,D. A. Ramirez-Ahedo

Static and dynamic evaluation of the CENAM (Mexico) 150 kN primary force standard machine by means of the INRiM (Italy) 100 kN six-component dynamometer

C. Morales-Aguillon, J. C. Torres-Guzman, D. A. Ramírez-Ahedo

Instrumentation improvements in the MMS-150 kN force standard machine, CENAM Mexico

C. Marinari, J. C. Torres-Guzman, A. Germak, D. A. Ramirez-Ahedo

Comparison between the CENAM (Mexico) 150 kN and the INRiM (Italy) 1 MN force standard machines

1
…
860
861
862
863
864
865
866
…
977