Skip to main content

Search Proceedings

Realization of forces (2N-20N) by primary method

Kamlesh K. Jain, S.S.K. Titus, H.N.P. Poddar and S.K. Dhulkhed
  • Abstract:
    The present paper describes the preliminary results of the metrological characterization of the newly design and developed force machine to realize the forces in the range 2N- 20N with an expanded uncertainty of 50 ppm. The characterization of the machine is carried out in compression using two transfer force standards of 5 and 20 Newton capacity. The calibration of the transfer standards directly against the dead weight force machine shows that the repeatability and reproducibility are better than 0.002% and 0.003% respectively, over the full range of measurement.
  • Keywords:
    force realization, dead weight force machine, force metrology
  • Download:
  • DOI:
    _unreg_tc3-2007.055

Event details:

  • IMEKO TC:
    TC3
  • Event name:
    Cultivating Metrological Knowledge
  • Title:

    20th Conference on Measurement of Force, Mass and Torque (together with 3rd TC16 Conference on Pressure Measurement & 1st TC22 Conference on Vibration Measurement)

  • Place:
    Merida, MEXICO
  • Time:
    27 November 2007 - 01 December 2007